Refinished Hardwood Floors Before and After Pictures Ideas
Refinished hardwood floors before and after pictures are generally treated with absorbed bites to extract grain patterns in the wood, and coated in paint or polyurethane to seal the stain and protect the wood. When it’s time to refinish a floor, both the polyurethane and the stain must be loosened. A hired drum grinder (which looks like an oversized band slip) will take the floor down to clean wood so you can refinish from scratch. You can do this only a few times in the life of a floor.
Place the heavy sandpaper belt on the drum sander refinished hardwood floors before and after pictures. Turn the grinding drum on and drive it to full speed while holding the grinder belt surface from the floor. Release it in the floor and immediately start moving the grinding machine back and forth. Drive the grinder diagonally across the floorboards, forwards and backwards at moderate speed. Go all over the floor, remove most of the existing finish and dig in clean wood. Repeat the process with the help of a sandpaper belt and drive the machine in the opposite diagonal direction as before to remove the remaining finish and leave clear wood.
Vacuum dust. Sand the floor a third time with the light grinding tape. Go in the direction of the boards this time, level the refinished hardwood floors before and after pictures and leave it clean and smooth. Vacuum well. Apply beneath the floor with a brush that works in sections of a few square meters, beginning at the furthest point from the entrance (so you can exit the room). Brush stain heavily, so it puddles. Let it sit for a minute, then wipe the excess stain with old rags. Make the whole floor. Let it set for 12 hours.